3 Awesome DIY Door Ideas That Start at Just $15 | Architectural Digest

Action 3: Eliminate the dowels and embroidery hoop and make cuts with a miter saw. “For my style, I alternated the cuts on each and every other dowel to make a pattern,” Ehrhardt suggests. 

Action 4: Position dowels and embroidery hoop again into place and safe completely utilizing Gorilla wood glue. Ehrhardt recommends inserting painter’s tape above these items to ensure they continue to be protected although drying. As soon as the glue is dry, clear away the painter’s tape.

Action 5: Paint the surface area of your doors. Ehrhardt recommends employing an edging paint brush to get close to the dowels and any other corners. Paint the relaxation of the doors by using a paint roller.

Move 6: After the bifold doors are entirely dry, install the doorways and the handle components. 

Farmhouse-model bifold doors

Hillary Quinn, a property decor blogger in Bloomington, Illinois, needed to liven up the bifold doors in her primary hallway and opted for a farmhouse-style option with barn doorway-influenced handles that increase significant oomph to her room. 

To make farmhouse style bifold doors, you are going to have to have:

Step 1: Cut MDF into four inch planks and cut to the size of your bifold door. Use smaller sized pieces at the major and bottom to make a border. 

Step 2: Nail every plank into bifold doorways. Quinn suggests continuing to open up and shut doorways throughout the approach to ensure they are performing successfully. She also endorses leaving an eighth of an inch of house amongst the doorway sides and together the prime, base, and middle to be certain the unique doors can open up and close simply. 

Move 3: Fill nail holes with wooden filler and paint MDF parts.

Move 4: To make door handles, reduce two dowel rods to measurement and use wood stain to build a rustic appear. Spray paint the split ring hangers in matte black. 

Phase 5: Drill 50 % of the ring tubing to the doors, slide the dowels in, and protected by screwing in the top piece of ring tubing.